|
|
||||||||
The Journal of Thoracic and Cardiovascular Surgery, Vol 104, 779-785, Copyright © 1992 by The American Association for Thoracic Surgery and The Western Thoracic Surgical Association
Y Kiyota, T Shiroyama, T Akamatsu, Y Yokota and T Ban
We examined the in vitro closing behavior of the St. Jude Medical heart
valve, simulating (1) a low-pressure system, (2) the anatomic peculiarity
of the right ventricular outflow tract and the main pulmonary artery, and
(3) disturbed diastolic compliance of the right ventricle. The variables in
the experiment were the load impedance to the pump and the valve
orientation. The results were as follows. The sequence of closure of the
two semidiscs was based on the valve orientation; reduction in impedance
caused the semidisc that closed last to remain open, while the other
semidisc continued its open-close motion; further reduction in impedance
prevented the semidisc, which continued its open-close motion, from closing
completely. These results highlight the forces involved in semidisc closure
and the existence of a threshold of force for completion of semidisc
closure. Further, the results demonstrate that under certain circumstances
the threshold cannot be exceeded via those forces. Therefore this
incompetence must originate in the prosthesis itself. In this regard, we
suggest an urgent need to reconsider the indications for St. Jude Medical
heart valve pulmonic implantation. Finally, we advocate the necessity for
an in vitro assessment of valve prostheses in a low-pressure system, to
evaluate the safety of right-sided placement.
ARTICLES
In vitro closing behavior of the St. Jude Medical heart valve in the pulmonary position. Valve incompetence originating in the prosthesis itself
Department of Cardiovascular Surgery, Rakuwakai Otowa Hospital, Kyoto, Japan.
This article has been cited by other articles:
![]() |
T. W. Waterbolk, E. S. Hoendermis, I. J. den Hamer, and T. Ebels Pulmonary valve replacement with a mechanical prosthesis. Promising results of 28 procedures in patients with congenital heart disease. Eur. J. Cardiothorac. Surg., July 1, 2006; 30(1): 28 - 32. [Abstract] [Full Text] [PDF] |
||||
![]() |
K. Ikeda, Y. Okazaki, K. Furukawa, S. Ohtsubo, J. Yunoki, M. Natsuaki, and T. Itoh Direct imaging of bileaflet mechanical valve behavior in the tricuspid position. Eur. J. Cardiothorac. Surg., June 1, 2006; 29(6): 1014 - 1019. [Abstract] [Full Text] [PDF] |
||||
![]() |
L. Rosti, B. Murzi, A. M. Colli, P. Festa, S. Redaelli, L. Havelova, L. Menicanti, and A. Frigiola Mechanical valves in the pulmonary position: A reappraisal J. Thorac. Cardiovasc. Surg., May 1, 1998; 115(5): 1074 - 1078. [Abstract] [Full Text] [PDF] |
||||
| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
| ANN THORAC SURG | ASIAN CARDIOVASC THORAC ANN | EUR J CARDIOTHORAC SURG |
| J THORAC CARDIOVASC SURG | ICVTS | ALL CTSNet JOURNALS |